- OEM: 14073-1032 - Kawasaki Air Cleaner Duct hoses for the KZ650-H2, H3. (Does not fit KZ650-H1), KZ700, KZ750, ZN700, ZX750 airboxes. Replace those hard, cracked and leaky hoses on your bike and get it running like it used to. Sold as a set of 4 only. Genuine Kawasaki Motorcycle part

$49.80 Ea

- OEM: 16012-1010- Rubber Choke Plunger Cap - Fits KZ1000J1-J3/K1/K2/M1/M2/P1-P15/R1/R2 KZ1100A1-A3/D1/D2/L1 KZ650H1-H3 KZ700A1 KZ750K1/K2/L1/M1/R1 ZN1100B1-B2 ZX750A1-A3

$11.90 Ea

- OEM: 92081-047 Genuine Kawasaki Part. Replace that twisted and stretched airbox hose spring. Fits Kawasaki KZ550 KZ650 G3 G4 G5 KD100 KD175 KD80 KE100 KE175 KE250 KH100 KM100 MC1 KV100 Genuine Kawasaki Motorcycle part

$6.62 Ea

- OEM: 92081-1177 - Genuine Kawasaki Part. Replace that twisted and stretched airbox hose spring. Fits Kawasaki KZ1000K1/K2/M1/M2/P1-P5 KZ250W1 KZ440A1-A4/B1/B2/D1-D5/G1 KZ650H1-H3 KZ750E1-E3/H1-H4/K1/K2/M1 ZL600A1/A2/B2/B3

$4.91 Ea

- STAGE 3 Dynojet Kit Fits Kawasaki 1978-81 KZ650 VM24 carbs Kit includes (4) 118 Main Jets, (4) 122 Main Jets, (4) Fuel Needles, (4) Adjusting Washers, (4) E-Clips, (1) Plug Drill, (1) Screw, (1) Installation Guide

Information:
STAGE 1: Intended for motorcycles with a stock engine using the stock airbox, air filter and stock pipe. Stage 1 kits are fully adjustable to allow the use of a well designed aftermarket pipes and stock replacement air f

$95.77 Ea

- 12-55752 - 52mm internal diameter -

Fits Honda CB400N/T, CB650Z, CB750K (with CV carbs).

Fits Kawasaki KZ250, KZ400B/G/L, ZR400, KZ440A/C/D/H, KZ550G/H, GPZ550, ZR550, KZ650H2 H3 (not H1).

Fits Suzuki GS400/S, GSX400E/F/L, GT500, GS550E/M, GT750.

Fits Yamaha SR500, XT500, XJ650, XS750, XS850, XJ900, XS1100.

Note: Some modification to side covers may be required to gain clearance.

$7.88 Ea

- Equivalent to OEM: 11013-1025, 11013-1060.
Fits Kawasaki KZ650H, KZ750E/H.

$7.24 Ea

- Equivalent to OEM: 92068-006 11012-1242- Set of 5 intake manifolds vacuum plugs. Replace those 'hard as bullets' plugs on your bike. Changing to new will ensure you do not have an air leak through the vacuum port. Fits Kawasaki EL250 EN450 EN500 EX500 KL250 KL600 KLX650 KZ1000 (thru 80) KZ1000P and some KZ1000J models in Canada KZ1100 KZ250 KZ550 KZ650 KZ700 KZ750 KZ900 VN750 Z1 ZG1000 ZG1200 ZL1000 ZL900 ZN700 ZR550 ZX1000 ZX1100 ZX600 ZX750 ZX900

$13.00 Ea

- Equivalent to OEM: 16065-047 - Set of 4 intake manifolds - 24mm Carb bore size. Fits Kawasaki KZ650 (thru 81). 54mm bolt center to bolt center. NOTE: these are 4 right hand side manifolds - the left hand side is no longer available. When mounting them, you need to turn the vacuum either upwards or turned to the inside. See below for the vacuum plugs

$107.00 Ea

- Equivalent to OEM: 16019-030, 11009-1563- Set of 4

Fits Kawasaki KZ1000-A1, KZ1000-A2, KZ1000-B1, KZ1000-B2, KZ1000-C1, KZ1000-D1, KZ900, KZ650-B1, KZ650-B2, KZ650-C1, KZ650-C2, KZ650-D1, KZ650-H1.

Suzuki GS550B, GS550C, GS550EC, GS550N, GS550EN, GS550LN, GS750B, GS750C, GS750EC, GS750N, GS750EN, GS750LN, GS850GN, GS1000C, GS1000EC, GS1000N, GS1000EN, GS1000LN, GS1000SN.

Keywords: Mikuni VM24 VM26.

$14.80 Ea

- Equivalent to OEM: 16019-031 13266-43010 - Set of 4 - fits Kawasaki KZ650 KZ900 KZ1000 (thru 1980) Suzuki GS550 GS750 GS850 GS1000 Mikuni 29mm smoothbores VM29, VM26, VM28.

$13.50 Ea

- Fits Kawasaki KZ440A, KZ440B, KZ440D, KZ550A, KZ550C, KZ550D, ZL600, KZ650-H1, KZ750K, KZ750M Yamaha SR250, XS400J, XS400K, XS400RJ, XS400RK, XJ550H, XJ550J, XJ550K, XJ550RH, XJ550RJ, XJ550RK, XZ550RJ, FJ600, SRX600, XJ650G, XJ650H, XJ650J, XJ650K, XJ650LH, XJ650RJ, XV700, XJ750, XV750H, XV750J, XV750K, XV750MK, XV920

$29.60 Ea

- Fits Kawasaki KZ650B3/C3/D1/D2/E1/F1/H1 KZ1000A3/A3A/A4/B3/B4 KZ1000C2/C3/C4/D3/E1/E2

$35.20 Ea

- Mikuni Carb O-Ring 4.8mm x 1.9mm (Individual)

$0.50 Ea

- Fuel Petcock Diaphragm - Double Layer Rubber Diaphragm approximately 22mm center to center screw holes, Center pin = 10mm x 6.6 (at widest point of pin) with 4.3mm (high) groove under wide part of pin 14.8mm overall length. Eight 3mm holes approximately 13.5mm center to center. Equivalent to OEM: 43028-1021 43028-1021 670B1504 -

Fits Kawasaki KZ440, KZ550A, KZ550C, KZ550D, ZL600, KZ650-H1, KZ750K, KZ750M,

Yamaha SR250, XS400J, XS400K, XS400RJ, XS400RK, XJ550H, XJ550J, XJ5

$17.20 Ea

- Visu-Filter Fuel Filter - Slim-line version - 3" long, 1/4".

$2.70 Ea

- Synchronize your carbs with this excellent tool. This is not your ordinary gauge set. Each 2" gauge features 0-76cm/hg readings, shut off valve and all hardware is high grade chrome finish instead of brass for longer life, higher corrosion resistance and better flow accuracy. Air flow control is handled by needle and seat valves instead of knobs.This helps to resist the dial indicator "bounce" associated with many other lower quality gauges. Set comes complete with a durable aluminum storage ca

$247.80 Ea

- Useful tool for cleaning carb orifices

$9.90 Ea

- Visu-Filter Fuel Filter - Slim-line version - 1.3" long, 1/4"

$2.40 Ea

- Visu-Filter Fuel Filter - Slim-line version - 2" long, and only 7/8" in diameter.

$3.43 Ea