- Equivalent to OEM: 15420-449-000 - Oil Filter Bolt

Fits Honda CB400A-T, CM400A/T/C, CB450/T, CM450A/C/E, CM500C/D/TC, GL500, CX650, GL650.

$8.91 Ea

- Used for honing valve guides - Will fit any 5.5mm valve guides

$38.23 Ea

- Used for honing valve guides Fits Kawasaki KZ250 KZ400 KZ440 KZ650 KZ700 ZN700A1/A2 KZ750E1-E3/F1/H1-H4/L3/N1/N2/R1 ZR750C1-C3/F2/H1-H3 ZX750A1-A3/E1/E2 Z1 KZ900 KZ1000 KZ1100 ZN1100B1/B2 ZR1100A1-A3 ZX1100A1/A2 KZ1300 ZN1300A VN1500 Fits Suzuki GN400T/TX/TZ/XT/XX GS400B/XB/C/XC GS425N/EN/LN GS450ET/EX/EZ/ED/GAZ/GAD/G/LT/LX/LZ/LD/LF/LG/LH/LJ/ST/SX/TX/TZ/TXZ/TXD GS500EK-EY/K1/K2/B/C/EC/N/EN GS550LN/LT/LX/LZ/MZ/TX GR650D/XD GS650EX/EZ/GX/GZ/GD/GLX-GLD/MD LS650FG/FH/PG-PY/K1 XN85 GS750B/C/N/EC/EN

$25.44 Ea

- Cam Chain Link 82RH2015 (Master Link listed will only fit the same make and type of chain do not intermix) see below for special cam chain breaker / riveter

$4.40 Ea

- Valve & Rocker Clearance Adjustment Tool - Set contains three wrenches (8mm 9mm and 10mm) and three adjusters (slotted screw type / 3mm and 4mm square).

$61.70 Ea

- The ultimate vacuum stick for insuring perfect surfaces on valves and valve seats. Interchangeable cups make unit suitable for use with virtually any size valve. Set includes vacuum stick, 3/4" and 1/4" diameter rubber caps.

$44.70 Ea

- Valve Spring Compressor, HD 32mm.

$184.60 Ea

- Clutch Hub Nut Socket, 24x20mm. Ideal for many of the early Honda motorcycles - CB750 SOHC uses the 24mm end.

$43.60 Ea

- Please check size needed, the OEM: switched puller size on some models part way through the production run - Flywheel Puller 16mm x 1.5mm RH Internal - Fits Honda CM200 CMX250 CMX450 CB350 CB400 CB450 CB500 CL350 CL400 CL450 CL500 SL350 SL400 SL450 SL500 - Fits Kawasaki KZ1000 (77) Z1 KZ900 KH400 - Fits Suzuki GS550 GS650 GS750 GS1000 (early and other 4 cylinder models) - Fits Yamaha FJ1100 FJ1200 XJ550 XJ650 XJ750 XJ900 XS1100

$8.18 Ea

- Self-service display card with 6 individual feeler gauges Allows accurate tappet adjustments Angled blade for easy access to tappets Makes valve adjustments quick and easy Made in the U.S.A.. . .

$23.65 Ea

- Tappet Feeler Gauges - .002 - .003 inch - Individual Allows accurate tappet adjustments Angled blade for easy access to tappets Makes valve adjustments quick and easy Made in the U.S.A.

$4.56 Ea

- Tappet Feeler Gauges - .004 - .005 inch - Card of 6 Self-service display card with 6 individual feeler gauges Allows accurate tappet adjustments Angled blade for easy access to tappets Makes valve adjustments quick and easy Made in the U.S.A.

$25.09 Ea

- Tappet Feeler Gauges - .004 - .005 inch - Individual Allows accurate tappet adjustments Angled blade for easy access to tappets Makes valve adjustments quick and easy Made in the U.S.A.

$4.83 Ea

- Tappet Feeler Gauges - .006 - .008 inch - Card of 6 Self-service display card with 6 individual feeler gauges Allows accurate tappet adjustments Angled blade for easy access to tappets Makes valve adjustments quick and easy Made in the U.S.A.

$25.09 Ea

- Tappet Feeler Gauges - .006 - .008 inch - Individual Allows accurate tappet adjustments Angled blade for easy access to tappets Makes valve adjustments quick and easy Made in the U.S.A.

$4.83 Ea

- Heat treated and chrome plated for durability Set includes three wrenches, 8, 9 & 10mm and three adjusters: screw type and 3 & 4 mm square-type Interchange adjusters and wrenches for nine different combinations Fits most motorcycles and ATVs with screw-type tappet adjusters.

$35.92 Ea

- Manufactured from .052 inch thick aluminum with a 6 3/4 inch outside diameter and a 6mm center hole Black anodized finish with easy to read numbers Check or set ignition and/or cam timing May be used on 2 & 4-stroke engines.

$13.64 Ea

- 4-Stroke Leak Down Tester - Checks percentage of cylinder leakage in a 4-Stroke engine. Includes 10, 12, and 14mm spark plug adapters, regulator and gauge. Use this tool to help determine the health of the engine and identify areas causing compression problems. Requires a compressor to use the tool.

$136.88 Ea

- Compression Tester comes with flexible hose for 10, 12, & 14mm spark plug applications. Features a quick disconnect with a pressure release of 300psi. Gauge. Packed in a convenient carry box with instructions. Use this tool to check the effective compression generated by each cylinder. For accurate results, ensure the throttle is wide open and the engine is at full operation temperature.

$104.51 Ea

- Interchangeable piston adapters Made of durable 6061 aluminum Fits all piston pins from 12mm mm (1/2 inch) to 24 mm (1 inch) Works on both full skirt and short skirt (slipper) pistons Non marring aluminum pin adapters Patent pending.

$42.24 Ea