- Black anodized finish with insulated hand grips. Crimp slot on end of tool secures most ignition terminals including "W" type, right angle and "High Tower" terminals. Crimps 7mm to 8.5mm ignition wire.Works with 10 to 22 guage solderless terminals. Great tool for crimping the ends on Dyna spark plug wires WARNING: Disconnect power source before using this tool! Keyword: Crimper

$12.00 Ea

- OEM: DYDC1-1- (used with twin cylinder bikes fitted with one dual output coil) 3 ohm green coils. OEM: DC10-1 5 ohm 12-volt black coils. Replacement for factory coils. Fatter spark means smoother running and less chance of fouling a plug.
See below for plug wires.
Check the resistance of the coils you are replacing to ensure a correct match.
If you have questions if these are correct, please call us or Dynatek at 1-800-928-3962
Never select a coil with a lower resistance than

$67.00 Ea

- OEM: DYDC1-2 - (used with twin cylinder bikes fitted with one dual output coil) 3 ohm mini black coil. Smaller and lighter than the DC1-1 coils, these are ideal for drag racing applications. Fatter spark means smoother running and less chance of fouling a plug. See below for plug wires. Check the resistance of the coils you are replacing to ensure a correct match. For some Kawasaki bikes with a ballast resistor in the circuit, the 3 ohm coil is the best choice - just remove the ballast resistor

$70.50 Ea

- OEM: DC2-1 (used with twin cylinder bikes fitted with one dual output coil) 1.5 ohm red coils. Replacement for ignition systems requiring 1.5 ohm coils. Fatter spark means smoother running and less chance of fouling a plug. See below for plug wires. Check the resistance of the coils you are replacing to ensure a correct match. These coils work to replace some CDI or electronic ignition system coils where the resistance is in the 1.5 ohm - 2 ohm range. If you have questions if these are correct,

$67.00 Ea

- OEM: DC3-1 DYDC3-1. 3 ohm green coils. Replacement for factory coils. Matched to the Dyna-S Electronic Ignitions. Fatter spark means smoother running and less chance of fouling a plug. See below for plug wires. Check the resistance of the coils you are replacing to ensure a correct match. These coils work to replace some point system coils where the resistance is in the low to mid 3 ohm range. For some Kawasaki bikes with a resistor in the circuit (i.e. KZ1000's in the late 70's and early 80

$130.00 Ea

- DC3-2 (used with twin cylinder bikes fitted with two single output coil) 3 ohm mini black coil. Smaller and lighter than the DC3-1 coils, these are ideal for drag racing applications. Fatter spark means smoother running and less chance of fouling a plug. See below for plug wires. Check the resistance of the coils you are replacing to ensure a correct match. For some Kawasaki bikes with a ballast resistor in the circuit, the 3 ohm coil is the best choice - just remove the ballast resistor from t

$137.00 Ea

- DC3-2 (used with twin cylinder bikes fitted with one single output coil) 3 ohm mini black coil. Smaller and lighter than the DC3-1 coils, these are ideal for drag racing applications. Fatter spark means smoother running and less chance of fouling a plug. See below for plug wires. Check the resistance of the coils you are replacing to ensure a correct match. For some Kawasaki bikes with a ballast resistor in the circuit, the 3 ohm coil is the best choice - just remove the ballast resistor from t

$70.50 Ea

- OEM: DYDC4-1 (used with twin cylinder bikes fitted with one dual output coil) 2.2 ohm grey coils. Replacement for factory coil. Matched to the Dyna 2000 Electronic Ignitions. Fatter spark means smoother running and less chance of fouling a plug. See below for plug wires. Check the resistance of the coils you are replacing to ensure a correct match. These coils work to replace some CDI or electronic ignition system coils where the resistance is in the low to mid 2 ohm range. If you have question

$67.00 Ea

- OEM: DYDC8-1 - (used with twin cylinder bikes fitted with one dual output coil still using points and condensers) 5.0 ohm black coil. Replacement for factory coils. Matched to many factory points systems. Fatter spark means smoother running and less chance of fouling a plug. See below for plug wires. Check the resistance of the coils you are replacing to ensure a correct match. If you have questions if these are correct, please call us or Dynatek at 1-800-928-3962 Never select a coil with a lo

$67.00 Ea

- Dyna Mini Shift Light is used in conjunction with Dyna Shift Minder System.

$51.00 Ea

- Dyna Mini Shift Light is used in conjunction with Dyna Shift Minder System.

$51.00 Ea

- Dyna Mini Shift Light is used in conjunction with Dyna Shift Minder System.

$51.00 Ea

- Dyna Mini Shift Light is used in conjunction with Dyna Shift Minder System.

$51.00 Ea

- Dyna Mini Shift Light is used in conjunction with Dyna Shift Minder System.

$51.00 Ea

- Ignition Coil - Universal - 12-volt 1.5ohm - 4.7 ohm, 9.6k secondary resistance. 135mm end-to-end, 40mm diameter for the main body. Comes with universal mount (may need adapting) and mounting hardware. For points/condensor ignitions.

$20.14 Ea

- Timing/Work Light Self Powered - Combines timing light and work light into one instrument. Works on all 12-volt gasoline powered engines. Uses 2 "D" cell batteries. Includes an LED indicator to insure proper hook up or detects a faulty flash tube.

$83.10 Ea

- Equivalent to OEM: 90890-03112- Professional Analog Multimeter, check ignition and electrical system. Check resistance, voltage and more... Comes with test leads (red/black) and instructions (includes battery) this is a quality Yamaha part but it can be used on any motorcycle. A vital tool in checking electrical components - including wiring harnesses, coils, charging systems etc.

$183.70 Ea

- OEM: 8337 Black 7mm Spark Plug Wire - Stranded, non-suppression - Sold by the foot - 8 foot will be plenty for most 4-cylinder bikes.

$0.99 Ea

- OEM: LB05F Black NGK Resistor plug cap, 90 degree - for 14mm thread spark plugs with terminal stud. Rubber waterproof boot to seal out the elements. See spark plug guide on lower right of page for more information on spark plugs and spark plug caps.

$2.24 Ea

- OEM: LD05F Black NGK Resistor plug cap, 90 degree - for 12mm or 10mm thread spark plugs with terminal stud. Rubber waterproof boot to seal out the elements. See spark plug guide on lower right of page for more information on spark plugs and spark plug caps.

$2.24 Ea