- OEM: 57001-113 - Shim Changing Tool Kawasaki Factory. Fits Kawasaki Z1 KZ900 KZ1000 Genuine Kawasaki Motorcycle part

$58.54 Ea

- OEM: 57001-208 - Fuel Level Gauge Fits Kawasaki KZ1000 (through 80) KZ900 KZ650 (through 80) KZ400 Z1A/B from frame number 32818 - these carbs are the ones with a brass drain screw angled to the side. Although a Kawasaki factory tool, this tool will fit all of the VM26 and VM28 carbs mounted on Suzuki GS750 GS1000 in the late 70's

$69.89 Ea

- Unit Dimensions W x D x H 16 3/4" x 6 3/8" x 12" Bin Dimensions 2 1/8" x 5 1/2 x 1 7/8" Keyhole slots in back allow cabinets to hang on walls or panels Prime cold rolled steel and fully welded construction eliminates twisting, warping or sagging Clear polypropylene plastic drawers will not crack or break with normal use Drawers have scoop bottoms for easy parts retrieval Rear backstops keep drawers from being accidentally pulled out of unit Lock-in dividers provided with each drawer allow

$113.89 Ea

- Unit Dimensions W x D x H 25 7/8" x 6 3/8" x 21 3/8" Bin Dimensions 2 1/8" x 5 1/2 x 1 7/8" Keyhole slots in back allow cabinets to hang on walls or panels Prime cold rolled steel and fully welded construction eliminates twisting, warping or sagging Clear polypropylene plastic drawers will not crack or break with normal use Drawers have scoop bottoms for easy parts retrieval Rear backstops keep drawers from being accidentally pulled out of unit Lock-in dividers provided with each drawer al

$202.71 Ea

- Ideal for jets, valve shims and other small parts - bottom is rounded to ease removal of parts

$8.84 Ea

- Ideal for jets, shims and other small parts - bottom is rounded to ease removal of parts

$5.09 Ea

- Black anodized finish with insulated hand grips. Crimp slot on end of tool secures most ignition terminals including "W" type, right angle and "High Tower" terminals. Crimps 7mm to 8.5mm ignition wire.Works with 10 to 22 guage solderless terminals. Great tool for crimping the ends on Dyna spark plug wires WARNING: Disconnect power source before using this tool! Keyword: Crimper

$12.00 Ea

- 15 Foot Length Black A Pair of Black 15" Heavy-Duty Ratchet Tie-Downs. We use these tie-downs when transporting bikes. Very strong design - rated at 1600 lbs capacity. Do not settle for less, your bike is too valuable for that…

$13.60 Ea

- With metal case, #2 & #3 Phillips, 5/16" & 3/8" flat bits - essential for removing those subborn phillips pan head screws... Don't risk rounding another one...

$14.85 Ea

- Two (2) flat and two (2) phillips bits - replacement bits for 3/8" impact driver

$2.76 Ea

- T-Handle Hex / Allen Key Set - Metric - Include Sizes 2mm, 2.5mm, 3mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 8mm, 10mm T-Handle design allows increased turning power Chrome Vanadium steel keys are heat treated for strength and durability Free standing steel stand keeps keys organized.

$18.28 Ea

- 180mm long hex socket driver T-bar

$4.15 Ea

- 180mm long hex socket driver T-bar

$4.15 Ea

- 180mm long hex socket driver T-bar

$4.40 Ea

- 180mm long hex socket driver T-bar

$4.40 Ea

- 2 - piece set fits all 8, 9, 10, and 11 gauge spoke nipples.

$4.99 Ea

- Calibrated to 20 lbs. in 1/2 PSI increments. Designed for use on motorcycles, ATV and many other vehicles with low pressure tires. Also can be used with many air shocks.

$3.23 Ea

- Vacuum Gauges - set of 2 gauges mounted to frame - come with hoses, set of two (2) 5mm hose adapters, mounting plate, damper fitting and instructions. Good for synchronizing carbs to get a smoother idle. .

$28.99 Ea

- TEMPORARILY OUT OF STOCK Vacuum Gauges - set of 4 gauges mounted to frame - come with hoses, set of four (4) 5mm hose adapters, mounting plate, damper fitting and instructions. Good for synchronizing carbs to get a smoother idle. Order 6mm adpters for Yamaha motorcycles. See below..

$57.02 Ea

- Cable Luber Tool - used to inject lubricant into cable housing - For use with Motion Pro Cable Lube - See Below

$6.28 Ea