Cable - Clutch - Z1 - KZ900 - KZ1000

Cable - Clutch - Z1 - KZ900 - KZ1000

$13.00 13
In stock
Only 3 left
Equivalent to OEM: 54011-048 - Motion Pro Clutch Cable 03-0002 - 50.5" long (end-to-end for the inner cable) with 3.5" slack (max. amount of end-to-end movement)

Fits Kawasaki KZ900A- Z1- Z1A/B- KZ1000-A1- KZ1000-A2
If you want slightly longer cables- use KZ900B clutch cable (TU06-3006) - these are approximately 2" longer. 52.5" length- 3.5" slack.
If you want shorter cables- use TU06-3005 48.5" length- 4" slack. Or TU06-3044- 47" and 3.25" slack. Measure your bike's cable dimensions BEFORE ordering.

1) Cables must be lubricated prior to installation and use. Failure to lube this cable before installation as well as periodic lubrication according to your bike's service manual will greatly reduce the life of this cable.

2) It is important to make sure the barrel end of the cable pivots freely in the lever blade. If it does not- the cable will break prematurely at the barrel end. Remove any corrosion in the lever hole and apply a light lubricant to the barrel when installing.

3) Make sure the slotted cable adjuster does not have rough edges- sometimes these chafe against the cable and cause them to fray.

4) Route the cable so it does not go through tight turns.

Is Universal Part: No

OEM Number(s): N/A

Motorcycle Fitment:

  • 1973 Kawasaki Z1 Z1
  • 1974 Kawasaki Z1 Z1-A
  • 1975 Kawasaki Z1 Z1-B
  • 1976 Kawasaki KZ900 KZ900-A4
  • 1977 Kawasaki KZ1000 Early KZ1000-A1
  • 1977 Kawasaki KZ900 KZ900-A5
  • 1978 Kawasaki KZ1000 Early KZ1000-A2
  • 1978 Kawasaki KZ1000 Early KZ1000-A2A